Specifications
This product uses thermal pressure technology, the film sealing is tight and without leakage. The sealer can effectively avoid samples’ loss and cross-contamination, it can seal PCR plates, 96-well deep well plates (2.2 mL and 1.6 mL). This product is simple to operate, which can achieve a fully automatic heat seal of transparent thermal sealing film and aluminum thermal sealing film.
Product Parameters
Operation Steps
1. Connect the power, turn on the power switch, the screen gets light, the instrument is going on self-test;
2. After the self-test is passed, the screen will display the main interface, which is the heat sealing operation interface;
3. Install the rolling film and set the appropriate feeding length of film;
4. Click the Set button on the heat sealing interface to enter the heat sealing temperature parameters setting interface, can set the corresponding temperature and time parameters according to the sealing film requirements;
5. After setting the parameters, click the back button to return to the heat sealing operation interface;
6. Click the heating button in the heat sealing operation interface and wait for the heating block to heat up;
7. The corresponding adapter and plate are placed on the loading platform;
8. When the actual temperature reaches the set temperature, the screen displays that the temperature reached, then press the start button, and the instrument will automatically complete the sealing film work;
9. After the sealing, the plate will be automatically out from the instrument;
10. Take out the sealed PCR plate /96-well deep well plate.
Note: If the operation or sample is wrong, it is necessary to stop the operation and take out the PCR plate /96-well deep well plate, please click the Stop button, the instrument will be stopped directly.
Notes
1. Do not put other items at the front door of the instrument to avoid opening impact event.
2. During the work of the instrument, please do not open the front door of the instrument to avoid clipping.
3. If do not use the instrument for a long time, please turn off the power switch and unplug the power plug.
4. Do not touch the heating block when is working or before cooling, avoiding scald of the high temperature.
5. If the instrument cannot work normally, please unplug the power plug immediately.
6. Do not pull the power cord, and pay attention to power safety.
Product recommendation
Techinical Support & Local Service
Warranty & Return Policies
Recently Viewed Products
Biological Indicator Incuba...