US Local Services Available, 3 Year Warranty and Periodic Calibration Services

Product Information

Product name	Product No.	Nominal Volume	Volume Range	Increment	Cap Color
Pipette	SPIP-10	10 μL	1-10 μL	0.1 μL	Grey
	SPIP-200	200 μL	20-200 μL	1 μL	Yellow
	SPIP-1000	1000 μL	100-1000 μL	5 μL	Blue
	SPIP-5000	5000 μL	1000-5000 μL	50 μL	Purple

Product introduction

Pipette, also known as a pipette gun, is a device used for quantitative liquid handling. A pipette is generally used for small or micro pipetting of liquid when conducting studies for analytical testing.

Product Features

· Single channel: 1-10μL, 20-200μL, 100-1000μL, 1000-5000μL; Multi-color range markers, four sizes optional;

· Lightweight and Ergonomic design provides excellent operating, very suitable for gripping. Light spring, press very labor-saving, help to relieve fatigue of hand joints, easy suction.

· Digital display, adjusted delivery volume clearly indicated in the large digital display on the handle.

· Fully made of high strength material. Anti-strengthening corrosion, alcohol disinfection; Enhanced anti UV linearity, UV sterilization;

· Different colors are used to identify pressing handles, making it easier to select pipettes of required specifications;

· Well-compatible with most of the pipette tips on the market;

· The pipette is equipped with Servicebio pipette tips to ensure good air tightness and accurate pipetting volume;

· Each Servicebio pipette is calibrated according to EN/ISO8655 standard, with strict quality control to ensure that each pipette is a high-quality product!

细节介绍图JPG(1).jpg

Pipette operation

Forward technique pipetting (low density liquids) :

1. Press the push button to the first STOP;

2. Slowly release the button to the ready position to complete the aspiration of the liquid;

3. Deliver the liquid by gently depressing the push button to the first STOP. After a delay of about one second, continue to depress the push button all the way to the second STOP. This action will empty the tip.

4. Release the push button to the ready position. If necessary, change the tip and continue pipetting.

Reverse technique pipetting (for high viscosity or volatile liquids) :

1. Depress the push button all the way to the second STOP for aspirating liquid, slowly release the button to the ready postion to complete the aspiration of the liquid, aspirating more than the preset volume;

2. Press the button to the first STOP and discharge the preset volume of liquid;

3. The remaining liquid should either be discarded with the tip.

细节介绍图JPG1.jpg

Calibration and adjustment: Take out the Service tool and place the Service tool as shown in the figure, Turn the service tool clockwise to increase, or counterclockwise to decrease the volume. Calibrate pipettes 1-2 times per year (depending on frequency of use)

细节介绍图JPG2.jpg

Storage and Transportation

Storage and transportation in room temperature.

Notice

1. Before liquid handling, make sure that the pipette and tips are at the same temperature, hold the pipette in an upright position while aspirating the liquid , and dip the tip under the surface of the liquid to a depth of 2~3mm. Fill and empty the tip by several times to moisten the tip nozzle before pipetting (particularly when working with high-viscosity liquids or density different from water);

2. If the pipette tip is full of liquid, do not turn the pipette upside down or lay it flat to prevent liquid from flowing into the cavity. It is recommended to use a special pipette stand when placing the pipette;

3. Make sure to use it within the volume range when pipetting;

4. If it is not in use for a long time, it is recommended to apply special maintenance oil to the sealing ring;

5. If need to disassemble, please find a professional technician for maintenance.

Product recommendation

SPIP-10	Pipette	PCS（1-10 μL）
SPIP-1000	Pipette	PCS（100-1000 μL）
SPIP-200	Pipette	PCS（20-200 μL)
SPIP-5000	Pipette	PCS（1000-5000 μL)
SPIP-B300	Pipette	PCS（8-Channel Pipette，300 μL)