Specifications
Introduction
The pipette tip is made of imported PP material, excellent workmanship without bending; Special treated inner smooth wall can effectively avoid liquid hanging on the wall, so as to reduce the samples lost or save precious reagents. It can effectively avoid the problems of poor linearity, low response or concentration change caused by adsorption.
SB low retention tips have the following advantages: reduce sample residue → improve experiment accuracy → improve sample recovery! (Notes: low retention tip is particularly important in protein and nucleic acid research and application!)
Main Parameters
Raw material: PP
Tip length: see chart
Retention treatment: low retention treatment
Sterilization: Radiation
Compatibility: Eppendorf, Thermo, Brand, Gilson, Rainin, D-lab etc.
Certificate: CE, FDA, UKCA, etc.
Other information: Sterile, DNase & RNase free, Pyrogen free (endotoxin free)
Batch No: See outside carton packing
Storage and Transportation
Sealed store and transport at room temperature, valid for 24 months.
Instructions
When using a single channel pipette, insert the end of the pipette vertically into the tip, and then tighten the pipette by turning it slightly from side to side
Note
1. Medical Device Production License (the relevant statement can be downloaded from the product page) is not necessary for this product.
2. Ware lab coat and disposable gloves during operation.
3. SB self-developed low retention material will become brittle, fog and other phenomenon may occur after high temperature and high pressure (121℃/30 mins) sterilization; Meanwhile, the low retention performance may be weakened, which is a unique feature of this low retention material and has no effect on the conventional use.
- Annual Membership Shipping Free